| Fire Rated Chutes | ||
Superchute manufactures fire rated chutes in 3 materials:
1. Fire Retardant Plastic (1/4" wall)
2. Galvanized Steel (0.05" wall)
3. Hard Aluminum (1/8" wall)
Even if Fire Rated sections are used, Fire Prevention Precautions still apply.
All sections are equipped with two 10,000 lb (Breaking Strain) cable assemblies.
1. Black Fire Retardant Plastic Sections - Wraparound Style
![]() |
![]() |
Click here or the pictures below to see more pictures of fire retardant chutes.
Specifications:
• 1/4" wall
• Made of Fire Retardant Plastic (this plastic will retard the spread of fire but is not fireproof).
• The black plastic is 5 times more abrasion resistant than the plastic used in the yellow chutes.
• Section Height: 46”
• Upper Diameter: 30" (or 36”)
• Lower Diameter: 29" (or 35”)
• Working Length: 40"
Weight per 30" dia Section:
Weight per 36" dia Section:
• The plastic has been subjected to the following tests:
This is the Fire Hazard Warning notice that appears on black sections.

2. Galvanized Steel Sections - Wraparound Style
![]() |
![]() |
Specifications: • 0.05" wall (18 Gauge) The loading pans & curtains of the entry sections are made of 1/4" FR plastic. Weight per Section:
Weights last verified Oct 23/2008 |
![]() |

3. Hard Aluminum Sections - Welded Style
![]() |
|
Specifications:
• 0.125" wall (1/8")
• Non-combustible
• Section Height: 48”
• Upper Diameter: 30"
• Lower Diameter: 24"
• Working Length: 40"
Weight per Section:
View other fire safety measures on the Fire Prevention Page.
www.superchute.com
tel: 1-800-363-2488